Mold Max® Silicones will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture a ...
Mold Max Silicones will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculptur...
No Vacuum Required Mold Max 14NV is a high-tear strength tin-catalyzed silicone rubber that does not require vacuum degassing. It is measured 100A:10B by weight (a gram scale is required). Liqui...
Mold Max® 14NV is a Shore 15A tin-catalyzed silicone rubber that offers low viscosity, fast cure and long library life. Mold Max® 14 NV does not require vacuum degassing. Mix ratio is 100A:10B by weight. Working time is 40 minutes and cure time is 4 hours at room temperature.
Mold Max 60 is a Shore 60A tin catalyzed silicone rubber containing iron oxide for added heat resistance. It features a low mixed viscosity and cured rubber exhibits very low linear shrinkage. Parts A & B are mixed 100A & 3B by weight. Pot life is 40 minutes and cure time is 24 hours. Net Weight : 12.36 Lbs.
MoldMax Stroke, Trial Unit. (1 kgs.) Mold Max Stroke™ is a brushable tin silicone rubber that self-thickens for making fast brush-on molds of almost any model. Properly applied, it will hold a vertica ...
MoldMax Stroke 5 kg. Mold Max Stroke™ is a brushable tin silicone rubber that self-thickens for making fast brush-on molds of almost any model. Properly applied, it will hold a vertical surface and wi ...
Mold Max XLS II is a Shore 30A tin-catalyzed silicone rubber that exhibits very low long-term shrinkage. XLS II molds last longer than other silicones in production when casting chemically hars...
Mold Max Thinner can be used to lower the viscosity od addition and condensation cure silicones. It also lowers the shore hardness of the finished product.
Mold Max Thinner can be used to lower the viscosity od addition and condensation cure silicones. It also lowers the shore hardness of the finished product.
Accelerator for Mold Max 15Tand 27T silicones - dropper 30 ml.
11,90 EUR(Prijs exclusief 21% BTW)
naam
mengverh.
rek
viscositeit
hardheid
scheursterkte
bijzonderheden
MM-10
100A:10B
529%
15.000 cps
10 A
100 pli
licht roze
MM-20
100A:10B
512%
20.000 cps
20 A
110 pli
licht roze
MM-30
100A:10B
300%
25.000 cps
30 A
125 pli
roze
MM-40
100A:10B
250%
45.000 cps
40 A
120 pli
licht groen
MM-60
100A:3B
132%
20.000 cps
60 A
63 pli
hittebestendig gieten tin, lood
MM-Stroke
100A:10B
300%
pasteus
30 A
125 pli
strijkbare silicone
MM-XLS
100A:10B
375%
30.00 cps
30 A
110 pli
extra lage krimp, polyester resistent
MoldMax XLS II
Mold Max ® XLS ® II is een Shore 30A tin-gekatalyseerde siliconenrubber die zeer lage langdurige krimp vertoont. XLS ® II mallen gaan langer mee dan andere siliconen in productie bij het gieten chemisch agressieve harsen zoals epoxy's en polyesters, evenals urethaanschuimen.
Mold Max Stroke
Mold Max ® Stroke ® is een kwastbare tin siliconenrubber die zichzelf verdikt voor het maken van snelle brush-on mallen van bijna elk model. Wanneer het correct toegepast wordt, zal het op een verticaal oppervlakblijven staan en zal het kleinste detail te gereproduceerd worden.
The Supergloves Bluple nitrile disposable glove is made from top quality nitrile. The Bluple nitrile is, despite its smaller thickness (3.2 mil.), Strong and particularly comfortable due to its hig...
The Supergloves Bluple nitrile disposable glove is made from top quality nitrile. The Bluple nitrile is, despite its smaller thickness (3.2 mil.), Strong and particularly comfortable due to its hig...
The Supergloves Bluple nitrile disposable glove is made from top quality nitrile. The Bluple nitrile is, despite its smaller thickness (3.2 mil.), Strong and particularly comfortable due to its hig...
The Supergloves Bluple nitrile disposable glove is made from top quality nitrile. The Bluple nitrile is, despite its smaller thickness (3.2 mil.), Strong and particularly comfortable due to its hig...
Comfortable and easy to wear paint spray mask. By making a minimum of components. Easy cleaning Due to the large surface area of the filters, a very low breathing resistance arises. The filters a...
Zeer efficiënt lossingsmiddel ontworpen om polyurethaanelastomeren, Thiokol rubbers, EPDM en andere synthetische elastomeren los te maken van aluminium, chroom, epoxy, polyester, rubber en stalen mallen, basis van siliconen - spuitbus 400 gram
Zachte wax dat gebruikt word om poreuze ondergronden (gips, klei, beton) af te dichten en zal helpen bij het lossen uit een urethaan-rubbermal en een verscheidenheid van andere materiaal, b.v.b. ...
Hier vindt u onze produkten gerangschikt naar diverse toepassingsmogelijkheden, zoals: Lifecasting, boetseren, afvormen, gieten, make-up, stuntwerk, dentaalwerk en studie.