Sealents

Sealant is a substance used to block the passage of fluids through the surface or joints or openings in materials, a type of mechanical seal. Sealants may be weak or strong, flexible or rigid, permanent or temporary.

Products

Info

Sealing Agents For Use On Porous Models

One Step® Release Agent And Sealer seals and releases porous originals in one step.

SuperSeal® was developed as an economical, fast-drying sealing agent for a variety of surfaces including modeling clays, gypsum plasters, concrete and wood.

Sonite® Wax is a soft paste wax used to seal porous surfaces and will aid in releasing urethane mold rubber from a variety of model surfaces, plastics from plastics and other industrial applications.

U-10 Soap Solution, to seal plaster models before applying mold rubber.

And the Kwikee® Sprayer, an economical alternative to aerosols for dispensing release agents and sealing agents.

One Step

OneStep /360 gram

Convenient, economical liquid sealing agent and release agent in one. This non-flammable, non-VOC formula is offered as a "one step" alternative to using a sealing agent followed by a release agent...

24,45 EUR (Prijs inclusief 21% BTW)

actie was succesvol

Dat is helaas niet gelukt.

Winkelmandje tonen Naar de kassa Verder gaan met winkelen

One Step™ /2,86 kg

One Step™ /2,86 kg

134,35 EUR (Prijs inclusief 21% BTW)

OneStep / 18ltr

Verzegel en losmiddel in een. Voor gebruik op poreuze modellen bij het maken van Poly-urethaan mallen. 18 liter emmer / 14,3 kgs

351,08 EUR (Prijs inclusief 21% BTW)

Super Seal

SuperSeal

Super Seal Kit

SuperSeal & Ease Release 205 Combo Pack One 2-oz. spritzer bottle each of Super Seal & Ease Release 205 Net Weight : 0.25 Lbs. /0,15 kgs

12,43 EUR (Prijs inclusief 21% BTW)

SuperSeal / 500ml

Afdichting en lossingsmidde, jerrycan 500ml

24,41 EUR (Prijs inclusief 21% BTW)

SuperSeal / 3,7lt

Afdichting en lossingsmidde, jerrycan 3,7 ltr

61,90 EUR (Prijs inclusief 21% BTW)

U-10

U10 & U12 Mold Solution

U-10 Soap Solution /1ltr

U-10 Soap Solution, to seal plaster models before applying mold rubber. Bottle 1 liter

34,84 EUR (Prijs inclusief 21% BTW)

U12 Mold Rinse and Release /3,6 kg

U-12 Mold Rinse & Release is an economical "non-soap" based concentrate that is diluted with water and applied to the surface of a rubber mold prior to casting gypsum plasters. Properly mixed and ...

104,54 EUR (Prijs inclusief 21% BTW)

Kwikee Sprayer

kwikee Sprayer

Kwikee Sprayer - 946 ml Pressure Sprayer
The Kwikee sprayer is an economical alternative to aerosols for dispensing release agents and sealing agents. It is a faster, labor-saving way to cover large models or molds and delivers sealing a...

138,57 EUR (Prijs inclusief 21% BTW)

GUIDE

Let us help you find your way.

The list below may help you find what you are looking for via an alternative path.

Afvormen

fllexibele materialen voor mallen: siliconen, pu-rubbers, alginaat etc.
Special Properties
Gietmaterialen

Materialen voor het gieten van harde of flexibele objecten.
Schuimen

Liquid Flexible Foam, Liquid Rigid Foam, Rigid Foam Blocks
Composieten

Harsen, polyester, epoxy, acrylhars, glasvezels enz.
Cold Casting

Metaalpoeders en plastics voor het "koud" gieten van IJzer, Brons, Messing of Tin.
Restauratie

Voor het vervaardigen en herstellen van architectuur en ornamentiek.
Prototyping

Materialen die worden gebruikt voor rapid prototyping
Textiel
Cosplay

Producten om je eigen cosplay kostuums en rekwisieten te maken