Sonite® Wax is a soft paste wax suitable for sealing porous surfaces prior to applying Smooth-On mold rubber. Sonite® Wax will aid in releasing mold rubber from a variety of model surfaces and can be used for other industrial applications. Application of a mold release agent may be necessary after Sonite® Wax has dried. Consult technical bulletin of mold rubber product for complete details.
Less Solvent – Higher % Solids
Easy To Apply
Safety - CONTENTS FLAMMABLE: Keep product away from flame and all ignition sources. Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Store and use material at room temperature 23°C This product has a limited shelf life and should be used as soon as possible.
Applying- For surfaces with smooth contours, Sonite® Wax can be applied by wiping on with a soft, lint-free cloth. Any excess should be removed. For porous surfaces, apply wax and let dry. Repeat and let dry. After applying final coat, let dry 20-30 minutes before buffing with a clean soft cloth or brush to produce a glossy surface (optional). If applying urethane mold rubber (VytaFlex®, ReoFlex® or Brush-On® 40), follow application of Sonite® Wax with a thorough coating of Universal® Mold Release or Ease Release® 200
Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.
Let us help you find your way.
The list below may help you find what you are looking for via an alternative path.