Fast Cat™ 30 /1,89 L

Fast Cat™ 30 siliconen rubberkatalysator versnelt de uithardingstijd van Mold Max™ 30 siliconenrubber.

Gebruikt in plaats van (of in combinatie met) Mold Max™ 30 reguliere Part B-katalysator, zal Fast Cat™ 30 de ontvormtijd verkorten van 's nachts tot slechts 30 minuten.

Meer informatie over Fast Cat™ 30

fastcat30tb.pdf [13 KB]

Instructions

Fast Cat™ 30 is for Mold Max™ 30 silicone ONLY.

Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Store and use material at room temperature 23°C. This product has a limited shelf life and should be used as soon as possible.

Measuring - When used alone as Part B for Mold Max™ 30 (100A:10B pbw mix ratio) instead of regular catalyst, Fast Cat™ 30 reduces the pot life of Mold Max™ 30 from 45 minutes to 10 minutes and the demold time from 24 hours to 1 hour. If the amount of Fast Cat™ 30 Part B is increased to 15% (100A:15B pbw), the pot life is reduced to 5 minutes and the demold time to 30 minutes.

Mixing - Add desired amounts of Fast Cat™ 30 and/or regular Mold Max™ 30 Part B to Mold Max™ 30 Part A by weight and mix thoroughly. Important: Be sure to scrape the sides and bottom of the mixing container several times while mixing. Be aware of your working time with reduced pot life. Note: results may differ due to variables in temperature, humidity, etc.

Note: Working time is reduced in proportion to the amount of Fast Cat™ 30 added. Adding Fast Cat™ reduces the library and production life of the cured rubber vs. our Mold Max™ regular catalyst