- Startpagina
- Modelleren
- Afvormen & Gieten
- Jesmonite Acryl Systeem
- Buddy Rhodes Beton Systeem
- Verzegelaars & Losmiddel
- Additieven
- Pigment
- Pigmentpoeders
- Silicone Pigments
- Silicone Pigments - FuseFX Coloring System
- Latex Pigments
- Polyester Pigment
- Metaalpoeders en -spray's
- CastMagic Powders
- Silicone Coloring System S.A.M
- Flock vezels
- UVO Pigmenten - UV bestendig
- EPTone Pigments
- Glow Worm Pigmenten
- Cryptolyte
- SO-Strong kleurstoffen
- Ignite
- Silc Pig™ Pigmenten
- Verf
- Vulmiddelen
- Oplosmiddelen & Verdunners
- Lijmen
- Gereedschap
- Apparatuur
- Speciale Make-Up
- Skin Illustrator Palettes
- Skin Illustrator Liquids
- Skin Illustrator Singles
- Skin Illustrator Glazing Spray
- Skin Illustrator Glazing Gels
- Skin Illustrator Concentrates
- Skin Illustrator Mouth FX
- RipperFX Palettes
- BlueBird FX / Allied FX
- Stacolor Paletten
- MaqPro Farde Palettes
- MaqPro Make-Up Mixer
- MaqPro Creamy
- MaqPro Bruise Gel
- TS PAX Paints
- Rubber Mask Grease Paint
- Old Age Stipple
- Tattoo Sheets
- Kwasten Make-Up
- Stempels & Mallen
- Sponges and Applicators
- Head Armatures
- FormX Tools
- Kryolan Make-Up
- Special Effects
- Prothetische Artikelen
- SFX Gereedschap
- FormX Academy
- Merken
- Toepassingen
- Literatuur
PU-rubbers
PU-Rubber
Het werkpaard voor de mallenmaker. Deze rubbers geven waar voor hun geld. Krimpvrije, duurzame mallen die soms duizenden gietsels kunnen leveren. geschikt voor gips, beton, kunstharsen etc.
PU Rubbers
PU Additives
Products
tabel overzicht
Clear Flex Series
| Clear-Flex™ | Mixture | Mixed Viscosity (mPas) | Specific Weight (g/cm3) | Pot Life (min) | Cure Time (hrs) | Colour | Hardness (Shore A) | Tensile Strength (N/mm) | Elongation at Break (%) | Schrinkage (%) |
| 30 | 1A:1B(Weight) | 750 | 1,03 | 15 | 16 | clear | 30 | 5 | 675 | ,2 |
| 50 | 1A:2B(Volume) | 250 | 1,04 | 25 | 16 | clear | 50 | 4,3 | 500 | 0,15 |
| 95 | 1A:1,5B(Volume) | 250 | 1,04 | 25 | 16 | clear | 95 | 35,7 | 175 | 0,28 |
PMC Series
| PMC-Series | Mixture (by Volume) | Mixed Viscosity (mPas) | Specific Weight (g/cm⊃3;) | Pot Life (min) | Cure Time (hrs) | Colour | Hardness (Shore A) | Tensile Strength (N/mm) | Elongation at Break (%) | Schrinkage (%) |
| PMC_121/30WET | 1A:1B | 1800 | 1,04 | 30 | 16 | clear_amber | 30 | 14,4 | 1000 | <0,1 |
| PMC_121/30DRY | 1A:1B | 1800 | 1,04 | 30 | 16 | clear_amber | 30 | 14,4 | 1000 | <0,1 |
| PMC_121/50 | 1A:1B | 1400 | 1,04 | 30 | 16 | clear_amber | 50 | 14,4 | 500 | <0,1 |
| PMC_744 | 2A:1B | 3400 | 1,01 | 15 | 16 | beige | 44 | 20,0 | 400 | <0,1 |
| PMC_746 | 2A:1B | 1200 | 1,03 | 15 | 16 | amber | 60 | 48,2 | 650 | <0,1 |
| PMC_770 | 2A:1B | 3000 | 1,04 | 30 | 16 | amber | 70 | 35,7 | 750 | <0,1 |
| PMC_780WET | 2A:1B | 2000 | 1,02 | 25 | 48 | amber | 80 | 35,7 | 700 | <0,1 |
| PMC_780DRY | 2A:1B | 2000 | 1,02 | 25 | 48 | amber | 80 | 35,7 | 750 | <0,1 |
| PMC_790 | 2A:1B | 3000 | 1,07 | 20 | 48 | amber | 90 | 53,7 | 550 | <0,1 |
Econ 80, Simpact & Urecoat
| Mixture (by Volume) | Mixed Viscosity (mPas) | Specific Weight (g/cm⊃3;) | Pot Life (min) | Cure Time (hrs) | Colour | Hardness (Shore A) | Tensile Strength (N/mm) | Elongation at Break (%) | Schrinkage (%) | |
| Econ 80 | 1A:1B(volume&weight) | 1,200 | 1,06 | 13 | 24 | translucent | 80 | 5,6 | 125 | ,014 |
| Simpact 85 A | 85A:100B(weight) | 1,100 | 1,09 | 4 | 48 | off-white | 85 | 6,6 | 165 | <,07 |
| Urecoat | 100A:10B(weight) | 3,800 | 8 | 16 | translucent amber | 70 | 9,4 | 875 | - |